Talson Box Van
Hanging garment box van trailer with honeycomb interior walls.
|Total length external (L+K)||13.710 mm|
|Inner loading length (IL)||13.605 mm|
|Total external width (W)||2.550 mm|
|Inner loading width (IW)||2.472 mm|
|Wheel base (WB)||7.455 mm|
|Neck height (D)||52 mm|
|Permissible gross weight||39.000 Kgs|
|Technical possible axle assembly load.||27.000 Kgs|
|Technical possible fifth wheel load.||12.000 Kgs|
|Overall height (H)||4.030 mm|
|Inner height (IH)||2.800 mm|
|5th wheel height (T)||1.150 mm|
|Rear loading height (R)||2.750 mm|
|Euro pallet capacity||34|
Chassis – KTL coated and painted chassis, made of ST 355 high tension steel, consisting of 2 longitudinal beams in “C” form and crossmembers at needed distances.
Brake System – Wabco EBS 2S/2M double circuit brake system with RSS, spring-actuated parking brake in accordance with EC directive 71/320 EEC
Tyres – 6 units 385/ 55- R22,5 tyres, steel rims for disc brake, Brand: Talson choice
Axle and suspension – BPW tri-axle pneumatic assembly with disc brakes and 9 tons
Liftaxle – Axle lifting drive automatically by EBS and extra button for traction
control at rear end of the trailer.
Landing gear – Jost Modul 24 tons mechanical landing gear.
Electric system – 24 Volt lighting installation with 2×7 + 15 pin plug socket, according to directive 75/756/EEC. Lighting Aspock, led markerlights, Europoint 2 on bumper.
Sidewall – Inside walls finished with Talfix aluminium panels, kickingplate with
height 300 mm/ 210 mm in front. 27 mm thick resine coated plywood floor, with steel protectionplate
Floor – at entrance (600 mm)
Rear Frame – Steel rear doorframe with 2 flat doors, 4 hinges and internal steel
doorlockers. (Bordoor doors)
Front Wall – Aluminium full rivited panel, plywood 18 mm inside, steel kicking plate
2.470x 500×4 mm
Roof – Sandwich panel with white prepainted aluminium sheet outside and polyester inside, 4 led lights with separate switch in lighting bar
Side Under-run Protection – According to directive 89/297/EEC, fold up type
Rear Ramp Buffer – Double roller ramp buffer with 4 rolls each side.
Mudguard – Anti spray according EEC directive
Toolbox – Plastic toolbox 600x400x500 mm
Rear Bumper – Steel bumper according directive 70/221/EEC
Ferry Rings – 2×2 ferry rings standard.
Wheel Chocks – 2 plastic wheel chocks in holder
Lashing Rings – 2×13 lashing rings embedded in floor according DIN 75410
Reflectors – 2x rear reflectors ECE R70, side walls white reflective strips, rear frame in red reflective strips.
Ladder – Entrance extendable ladder
Colours – Upperstructure is white RAL 9016, alu profiles anodised and chassis KTL coated and painted MB 7350
Options & Extras
Sparewheel holder – Included
Sparewheel – Optional
COC for registration – Included
Code XL certificate – Included